Home Sitemap Info Search Terms & Conditions

 UK / englishD / deutschF / françaisPolski / Po PolskuRossija / po-russki 
 US / englishCH / deutschA / deutschSrbija / srpskiEspaña / español 
 


ACF 30U-MBS
ACF 30U-MBS

This floppy-based reader will fit into any standard drive slot, making it an integral part of your PC. It has the same functions as that of the ACR30 without the need for an extra accessory at your desktop.

Casing: 3,5 "

 

The metal casing of ACF30U-MBS makes it even more robust against EMI (Electro-Magnetic Interference) and can withstand the toughest working environment.




Order Information

Product Number: 1.1.U.AC.05
Price per unit: 65.95 US $
40.95 £
47,95 €
10 units and more: 61.95 US $
37.95 £
44,95 €
warranty:
6 months
higher volumes up on request
ACF 30U-MBS Alle Preise sind Netto-Preise. Verkauf nur an gewerbliche Abnehmer. Ask for project-pricing.



Product Information

The ACF30U-MBS is the ideal solution for easy integration of a smart card reader into the desktop environment. It uses the same electronic circuit as the ACR30, and has the same versatility and costeffectiveness that have always been associated with ACS’ smart card readers. As it uses the PC’s internal power supply from the USB interface, extra power supply is not needed for the device to work. Similar to ACR30, ACF30U-MBS Smart Card Reader/Writer is also very simple to use and install. It is ideal for electronic commerce, home banking or e-purse facilities, secure computer access or any of a multitude of other applications.

 

The metal casing of ACF30U-MBS makes it even more robust against EMI (Electro-Magnetic Interference) and can withstand the toughest working environment.




Standard Features

Read and write all microprocessor cards (MCU) with T=0 and T=1 protocols 

Read and write popular memory card types 

Certificate of conformance: ISO 7816-1/2/3, CE, FCC, and Microsoft WHQL 

ISO7816-1/2/3 compatible smart card interface 

Support commonly used memory cards (I2C, SLE4406, SLE4418/28, SLE4432/42) 

Support PPS (Protocol and Parameters Selection) with 9600 – 1152000 bps in reading and writing smart cards 

USB interface to PC with simple command structure 




Technical Specifications

MCU Cards: 

 

The ACF30U-MBS can operate MCU cards with T=0 and T=1 protocol. In addition, it also works with the below mentioned memory-based smart cards. Memory-based smart cards (synchronous interface) 

 

 

 

'104' type EEPROM non-reloadable token counter cards, including: GPM103, SLE 4406, SLE4436, SLE5536, ST1305, ST1335 

 

Cards following the I2C bus protocol (free memory cards) such as Atmel AT24C01/02/04/08/16, SGS-Thomson ST14C02C,14C04C 

 

SLE4432/4442 intelligent 256 bytes EEPROM with write protect function: SLE 4432, SLE 4442 

 

SLE 4418/4428 intelligent 1K bytes EEPROM with write-protect function: SLE 4418, SLE 4428 

 

 

 

 

 

 

 

Power supply: 

 

Supply voltage 

Regulated 5V DC 

Supply current 

100mA 

 

 

Universal Serial Bus Interface: 

Type 

USB, four lines: USBPWR(+5V), d-, D+ and GND 

Connector 

2x5 pins, 2.54mm pitch L-shaped header 

Speed 

1.5 Mbps 

USB Cord 

45cm length, 2x5 pins (2.54mm pitch) plug on both ends. 

 

 

Smart Card Interface: 

Standard 

ISO 7816 1/2/3, T=0 and T=1 

Supply current 

max. 50mA for smart card operation 

Smart card read / write speed 

9600 – 115200 bps 

Short circuit protection 

+5V / GND on all pins 

LED indicator 

The presence of the smart card power supply voltage is indicated through a green LED on the front panel of the reader 

CLK frequency 

4 MHz 

Card connector 

sliding friction type 

Card insertion cycles 

min. 100,000 

 

 

Case: 

Overall Dimensions 

126mm (L) x 101mm (B) x 25mm (H) 

Front Plastic Cover 

ABS Material, Black color 

Metal Body 

Japan Electric Galvanized Steel Sheet (rust-proof), original color 

Weight 

300g (not including cable) 

 

 

Operating Conditions: 

Temperature 

0 - 50° C 

 

 

Standard/Certifications: 

ISO7816-1/2/3, CE, FCC, Microsoft WHQL 98, ME, 2K, XP 

OS: 

Windows 98, ME, 2K, XP OEM 

OEM: 

Logo possible, customer-specific colors, casing, and card connector 




Interfacing Scheme

The floppy-bay reader is designed to be mounted or integrated into a standard PC Chassis. The power of the reader is obtained through the internal switching power supply of the PC. Basically, the floppy-bay reader is the same as an ACR30 reader.

The size is the same as a standard 3”1/2 floppy driver. Screw holes will be provided. Please follow the below mentioned scheme for connection.

 

 

USB reader, using an USB cord to connect the reader to the Motherboard

 

An USB cord is required:

 

  • Please plug one end of the cord to the back of ACF30U-MBS, and the other end to the plug on the motherboard.