Data Output Formats: 

The keypad reader reads standard proximity format data from HID iCLASS ® cards, and will output data as encoded. When reading MIFARE® cards, the keypad reader can be configured to output 26-bit, 32-bit, 34-bit, 37-bit, 40-bit, or 56-bit Wiegandformats based on the card serial number. 

Wiegand keypad data format can be configured for transmission of individual key presses as ASCII encoded Hex digits, or for buffering and transmission of the PIN as a card number in SIA 26-bit format with a configurable facility code. 

Additionally, the RWKL550 and RWKLB575 offer a USB and RS-485 connection. Using the ISO 7816 protocol, the standard for contact smart card applications, the RWKL550 and RWKLB575 allow connection to a PC or microcontroller to support read/write applications. 

Keypad: 

Offers 12 discrete switches with metal keycaps. Raised tactile mark on the fifth key for visually impaired users. Configurable audio feedback. Backlit numbers in bezel overlay, above each key. Lighting is configurable: Always On, Triggered by Card Read, or Triggered by Key Press. 

User Function Keys: 

Four programmable user function keys with metal keycaps. User function keys are available with factory default settings or can be customized. In either case, user function keys are easily defined in the graphical LCD display. 

Security: 

64-bit authentication keys are extremely secure. Readers and cards require matching keys to function. All RF data transmission between the card and keypad reader is encrypted, using a secure algorithm. The key management system reduces the risk of compromised or duplicated cards. 

Cards and keypad readers with site-specific keys are optionally available from the factory. Alternatively, the CP575 Card Programmer can be used to create sitespecific keys. The programmer also allows users to create a keypad reader configuration card, which is used to re-key cards and keypad readers on site. 

In addition to the card security, bioCLASS offers additional user verification. If you require specific information, please consult the factory. 

Programming/Configuration: 

All cards are shipped with unique diversified keys; keypad readers are shipped with compatible keys. All keys are derived from the HID Standard key. While cards and keypad readers with Standard keys are interchangeable, the keys are highly secure. Further enhance security by ordering with iCLASS Elite custom keys. 

Audiovisual Indication: 

Audio transducer provides configurable tone sequences to signify access granted, access denied, power up, and configuration card read. A light bar provides a clearvisual status indication in red, green, or amber. All units contain an LED to light thesensor area if the biometric option is included. 

Graphical Display: 

The backlit graphical LCD display offers a 60 x 18 mm viewing area, 120 x 32 resolution. It is factory preset to provide written instructions to the user. Fully customizable, the display also describes the function of the user function keys. 

Open Collector Output RWKL550 and RWKLB575: 

Normally open logic output, controlled via serial port. Switches up to 50mA at 12 VDC. Use interposing relay for larger loads. Configurable to latch momentarily upon successful local verification of PIN stored on the card. 

Mounting: 

Mounting plate attaches to U.S./EU/ Asian back box, 52-60 mm screw hole spacing (vertical or horizontal). Keypad/LCD reader housing latches onto mounting plate, secured with a screw. Mounts on metal with minimal read range impact. 

BIO Mounting: 

The RWKLB575 and BIO500 include a longer mounting plate. When using the BIO500 to field upgrade an existing RWKL550, you must remove the original mounting plate and replace it with the longer mounting plate. 

Indoor Design: 

Rugged, weatherized polycarbonate enclosure provides reliable performance and resistance to vandalism. (Please note that these products are not suitable for outdoor use.) 

Enrollment: 

Enrollment software included with the CP575 unit is required to write the biometric template to the cards. The template never enters the PC – it is collected by the reader and written to the iCLASS card all in one simple process. To alleviate privacy and database management concerns, the biometric template is stored on the iCLASS card rather than in the unit. 

iCLASS Credential Compatibility: 

The RWKL550 and RWKLB575 are compatible with all iCLASS credentials. The units can read or read/write to credentials compatible with several ISO standards 

including: 

• 15693 - read/write; 2k bit (256 Byte) and 16k bit (2k Byte) iCLASS credentials 

• 14443A - read only; MIFARE® Standard (serial number), Ultralight, or DESFire™ 

• 14443B - read/write; 16k bit (2k Bytes) iCLASS credentials 

Note: 16k bit (2k Bytes) cards are required for biometric option. 

Warranty: 

Warranted against defects in materials and workmanship for one year. 

Options: 

Color – Black 

Key Management - Standard or High Security 

Selectable Output Type (for MIFARE cards) 

Termination - removable connector with miniature screw terminals 

Programmable LED/Beeper/LCD/menu key operation 

Accessory - Security Tool: 04-0001-03 

*Check factory for availability